DRAG

NABL Accreditation

  • Home
  • NABL Accreditation
Calibration Services

Scope Of Calibration

Sr. No. Description Range
1 Force: (UTM, Load Cells, Force gauges, TTM, CTM etc.) 20g to 1000kN in Tension and Compression
2 Extensometers (Video & Laser, Electronic, Mechanical & Clip on) 0 To 10mm
3 Travel of Cross Head Range 0 - 500mm
4 Long Travel Extensometer Range 0 - 550mm
5 UTM Cross-head / Actuator Extension 0 - 550mm
6 Force : Creep Testing Machine 0.001kN to 100kN
7 UTM Cross-head / Actuator Speed 0 - 550mm/min
8 Push Pull 0-500 N (Tension and Compression Mode)
9 Anemometer 0-30 m/s

  1. Pressure Gauge
  2. Vacuum Gauge
  3. Compound Gauge
  4. Pressure / Vacuum Switch
  5. Pressure Transmitter
  6. Differential Pressure Indicator / Gauge
  7. Magnehelic Gauge / Inclined Manometer
  8. Hydraulic Gauge (700kg / cm2)

  1. Temperature Indicator
  2. Temperature Indicator Controller
  3. Temperature Sensor (For 3 Points)
  4. Temperature Transmitter
  5. Temperature Gauge / Switch (For 3 Points)
  6. Thermostat (For 3 Points)
  7. Temperature Indicator With Sensor (For 3 Points)
  8. Temperature Controller With Sensor (For 3 Points)
  9. PLC Temperature Indicator Controller
  10. PLC Temperature Indicator Controller With Sensor
  11. Glass Thermometer / Min & Max Thermometer (For 3 Points)
  12. Wet & Dry Hygrometer / Digital Thermometer (For 3 Points)

  1. Timer / Stop Watch / Hour Meter
  2. Tachometer / RPM Indicator
  3. Blender RPM / RPM Of Machine

  1. Digital Hygrometer / Thermohygrometer
  2. RH Indicator / Controller
  3. RH Sensor (For 3 Points)
  4. RH Indicator With Sensor (For 3 Points)
  5. RH + Temp Transmitter (For 3 Points)
  6. Wall Mounted Temperature Indicator With Sensor (For 3 Points)

IN J FORCE
Sr. No. Description Range
1 UTM 0 to 1000 kN (T + C)
2 Comp 0 to 3000 kN
3 Creep 0 to 100 kN
4 Push Pull Gauge 0 to 500 N (T + C)
IN L TORQUE
Sr. No. Description Range
1 Wrench Up to 5000 Nm
2 Load Cell Up to 5000 Nm

  1. Ph / Conductivity Meter Instruments
  2. Rotameter / Flow Instruments
  3. Ampere Meter / Voltmeter

  1. Multimeter / Clamp Meter
  2. Sound Level Meter / Lux Meter
  3. Anemometer
  4. RTD Simulator

Sr. No. Description Range
1 UTM (Tension & Compression), Tensile Testing Machines 0.2N to 1000kn
2 Compression Testing Machines (Cube Testing Machine) Up to 3000kN
3 Creep Testing Machines 0.001 kn to 100 kn
4 Load-cell with Indicator (Tension & Compression) 0.2 N To 1000 kn
5 Force Gauges In Range (0 To 500 N T+C) -

Sr. No. Description Range
1 Weighing Balances (Mechanical, Digital) Up to 150kg
2 STD. Loose Weights -

Sr. No. Description Range
1 Torque Wrench 1Nm to 1000Nm
2 Torque Load-cell 1kgcm to 20kg-cm

  1. Measuring Cylinder
  2. Measuring Flask
  3. Burette
  4. Pipette / Micro-pipette

  1. Multimeter
  2. Clamp Meter
  3. Voltmeter
  4. Ammeters
  5. Meggar